About Us

Roof Care Insulation Materials Llc Establishment Abu Dhabi has been established in 2009. A water proofing and heat insulation Division is fully mechanized with advanced machineries that moves to work sites along with highly skilled technicians to bridge the technological gap and bring in the best possible technology and quality application right to the door-step of every individual customer in the region.

Quality Policy

To install quality thermal insulation & moisture protection system for buildings ensuring performance during stipulated guarantee period. We are committed continuously to improve the quality management system through innovative approach, planning and teamwork.

Quality Objectives

Maintain market superiority through our quality services.

To achieve a Sales target of 100000 m2 / Month and to achieve the predetermined monthly target set by the top management to minimize the customer complaint levels to 0.20% of the total completed projects.


"Manufactures Guarantee" of 25 Years (Lifetime) for roof shall be issued on completion of the project.

Roofcare Insulation Materials Llc warrants that its products are of professional grade and free of any and all manufacturing defects. Roofcare Insulation Materials Llc does not warrant the existing roof system or structural deck or other components not produced by Roofcare Insulation Materials Llc.

Any damages to the coatings system caused by the existing roofing system, including but not limited to delaminating, cracking, blistering, bleed-thru, deck deterioration or related failures are outside the scope of the Roofcare Insulation Materials Llc Warranty. Contact Roofcare Insulation Materials Llc for additional information.

The statements provided concerning the Materials Llc shown above are intended as a guide for material usage and were believed to be true and accurate at the time of printing. No statement made by anyone may supersede this information, except when done in writing by Roofcare Insulation Materials Llc in form of a contract.

Since the manner of use is beyond our control, Roofcare Insulation Materials Llc does not make nor authorize anyone to make any warranty of merchantability or fitness for any purpose or any warranty, guarantee or representation, expressed or implied, concerning this Materials Llc except that it conforms to Roofcare Insulation Materials Llc specification properties. Buyer and user accept the product under these conditions and assume the risk of any failure, any injury of person or property (including that of the user), loss or liability resulting from the handling, storage or use of the product whether or not it is handled, stored or used in accordance with the directions or specifications. Roofcare Insulation Materials Llc must be notified in writing of any claims and be given the opportunity to inspect the complaint or failure before repairs are made.

Health Safety And Environment Policy


Ensure sufficient ventilation during application.

Wear Protective Clothing, Gloves and Chemical Splash Goggles. Also wear Safety Shoes,
Overalls, Hardhats and safety Harnesses. Coordinate protective measures with the Owner or his designated Representative.

Remember, these are products are to be handled, used and applied only by professionals.

NOTE: Copies of all current MSDS for all components must be kept on site. Provide all crew members with appropriate safety data information and training as is related to the specific chemical compound he or she may be expected to deal with. Each crew member shall be fully aware of first-aid measures to be undertaken in case of accidents.

Always make sure any ladders being used are securely tied off and take the time to be aware of the surrounding area when on a roof or high rise surface. When required, provide barricades, retaining ropes, safety elements (active/passive) and any appropriate signage required by OSHA, NIOSH, and NSC and/or the Owner or his designated Representative. When near the edge of a roof/deck/surface, always work facing the edge, not with your back to it. Make sure airless sprayer hoses or cables or cords are positioned in such way to minimize the chance of tripping over them. Never point a power washer or airless sprayer gun in the direction of a person. High pressure nozzles can cause injection wounds if held close to the skin.

Do not use open flames to accelerate the drying/curing of any products described herein. These products must air dry on their own. Never work alone.

Roofcare Insulation Materials Llc recommends that applicators wear UV-rated darkened safety goggles when applying the finish coating in bright sunshine.

As with all chemicals, use caution and good industrial hygiene when handling and disposing of empty containers. Never leave empty or half full containers on site as these can be dangerous and a accidents might happen. Never discharge rest Materials Llc directly into any open body of water. If in doubt, always contact the local authorities prior to discharging to the soil surface. Refer to the Product Data Sheets (TDS) and the Material Safety Data Sheets (MSDS) for additional information or contact Roofcare Insulation Materials Llc.

Comply with requirements of OSHA, NIOSH or governing local authority for work place
safety. It is the responsibility of the applicator to comply with all local, state, federal, state building codes / regulations and OSHA, NIOSH safety regulations.


  • Keep the working area free of loosely lying tools and equipment’s.
  • All spillages should be effectively cleaned to avoid any slippery effect.
  • Safe stowage area to be allocated & protected prior to the arrival of raw-Materials Llc to site.
  • All Raw-Materials Llc for smooth execution of the work to be neatly stored for easy access.
  • Allocate Persons liable on the scope of the job for the issue of goods from storage area.
  • Provide trash cans at sites to collect and dispose wastes that accumulate on a daily basis.

CAUTION!: Coated areas become extremely slippery when wet

Our Organisation