Services

Roof Care Insulation Materials Llc Establishment Abu Dhabi has been established in 2009. A water proofing and heat insulation Division is fully mechanized with advanced machineries that moves to work sites along with highly skilled technicians to bridge the technological gap and bring in the best possible technology and quality application right to the door-step of every individual customer in the region.

A building protects us from the natural forces like rain, heat, cold, wind etc.. The concrete structures on its own is not watertight. The unprotected structures suffer from water induced damage including deterioration and corrosion caused by chlorination, oxiation and sulphation. The reduced alkalinity in concrete turns yacidic; which may lead to the rusting of reinforcement bar and eventually may expand to hamper load bearing capacity of the building structures drastically.

Roof care hi tech combo water proofing systems cover every water proofing need of building & construction industry. The technology ranges to ;

1. Energy Saving Insulations
2. Hi-Tech Combo Roofing System
3. Bituminous Waterproofing
4. Waterproofing and Damp-Proofing’s
5. Crack Injections
6. Flooring Coating and Painting
7. Expansion Joint Sealant

Energy Saving Insulation

As our cooling cost represents the majority of your rocketing energy bills, our advanced roof energy saving technology guarantees to cut off your energy cost plus the cost of your air conditioning equipments and maintenance. Wall of buildings represent the second largest area of structure where heat gain occurs, poorly insulated pipes and ducts increases energy consumption, waste and adds to additional costs. Roof Care advanced insulation systems cuts your external roof temperature by up to 40 % saving running time on your air conditioning etc..

Hi-Tech Combo Roofing System

Hi-Tech Combo Roofing System is a comprehensive system comprising of waterproofing thermal insulation and finishing for the roof. This Unique system is technically advanced, fast curing and is fully bonded to the roof slab. It is the fastest way to insulate and waterproof your entire roof. Highly efficient spray technologies, specially designed detailing and perfectly matching system components combined with the employment of modern application technologies enables the roofing system to save up to 40% of time as compared with other waterproofing systems. With 25 Years Manufacturers Guarantee against any leakage the system meets all latest thermal insulation standards and regulations in UAE and is accepted by all major property developers, consultants and contractors. Hi-Tech Combo Roofing System is an assured solution for your roof.

Application of Hi-Tech Combo Roofing System

Site Preparation

Upon casting and complete curing of the roof slab; site shall be visited by our engineer and confirms the acceptance of the roof for the application of Hi- Tech Combo Roofing System. A Preliminary site inspection shall be carried out and any further preparation work if required shall be brought to the attention of the main contractor.

Application of Polyurethane Foam

After Cleaning the roof using compressed air to make sure substrate is free of dust and debris; apply Perpol SS10 - a blended Polyol and when combined with Perate 250 ( Polymeric Diphenylmethane Diisocyanate) leads to the formation of rigid polyurethane foam that can be formed into a core of the formed rigid polyurethane foam is sprayed onto the roof slab. The spray applied foam in liquid state hits the slab at high pressure and penetrates into every crack and pin holes that exist on the slab. In minutes it expands 30 times its volume and solidifies thereby sealing the entire substrate. The foam creates an impermeable waterproofing cum insulation layer with high thermal resistance.

Application of Nitoproof 30

After the completion of Polyurethane foam, Multi-purpose rubberised Bitumen emulsion (FOSROC Nitoproof 30 ) shall be applied over entire foam which provides a highly effective waterproof membrane, which can be used as a waterproof and curing compound in a single application.

Flood Testing

Once Bitumen emulsion coating is completely dried, our Engineer will visit the site to inspect the works completed and give clearance for flood test ( Minimum 24 hours ). On successful completion of flood test, a test report shall be prepared and maintained for records.

Seperation Layers

After the successful completion of flood test, water shall be removed and 120 gsm loose geo textile membrane shall be laid as a protection layer over the entire roof. Our crew will do the panelling work using polyboard expansion joint filler board and pre- mixed cementitious adhesive mortar to attain the desired slope levels piror to the commencement of screeding work.

Screed Laying

After the completion of panels apply protective screed of 25 N/nm2, 300 OPC and 10mm aggregate strength screed will be laid in panels. Minimum thickness of the screed will be 45mm and average thickness will be 80mm.

Angle Fillets and Joints

Application of polybond agent to all of the corners and upstands; and prepare angle fillets all around parapet skirting area and up stands using sand cement mortar.

Finishing - Decorative waterproof coating

Acrylic polymer modified protective and decorative coating ( Fosroc Brushbond) shall comprise specially selected cements, graded hardwearing aggregates and additives supplied in powder form together with a liquid component of blended acrylic co-polymers and wetting agents. The total dry film thickness of the coating shall be not less than 2mm and shall be capable of providing resistance to wear and weather and good chemical resistance to mild inorganic acid solutions etc.. This coating provides aesthetic look to the roof.

Bituminous Waterproofing

Bituminous waterproofing systems are designed to protect residential and commercial buildings. Bitumen (asphalt or coal-tar) is a mixed substance made up of organic liquids that are highly sticky, viscous, and waterproof. These systems are sometimes used to construct roofs.

• Terrace Waterproofing

Terrace Waterproofing Method:

Washing the terrace surface and making it dust free. Filling all the visible cracks by way of specially prepared Silicone crack filler. Applying First coat for Filling the invisible cracks & small holes with diluted silicone. Applying Second & Third coat of Silicone based cement waterproofing to strengthen the surface. Applying Final Forth Coat of Transparent Silicone by Roller.

Terrace Waterproofing, Roof Waterproofing

PREPARATION & APPLICATION PROCEDURE -TERRACE WATERPROOFING This is a Water based Silicone added with white cement in proper ratio.After applying all coatings on the surface, it will set within half an hour. The completely curing is needed for 24 hours to strengthenNo Worries About Load of The Silicone Waterproofing. Only 3 to 5mm layer thickness to prevent water leakage from the applied surface.

Waterproofing and Damp-Proofing

At Roof Care Abu Dhabi we are specialized in all types of Waterproofing and Damp-proofing including below grade walls and slabs, blind sided walls, roof tops and between slabs, fountain, water features, above grade cavity walls vapor barriers, Substation, waste water and sewer system plants, potable and non potable water tanks special liners and negative side waterproofing.

• Self-adhesive membrane waterproofing
• Liquid membrane waterproofing (All types)
• Cementitious waterproofing
• Crystalline waterproofing

Crack Injection

Roof care Abu Dhabi has proven record in specialized systems of repairing concrete by using Crack Injection system i.e. Epoxy, Polyurethane & Turbo Seal injection systems. Crack injection is an extremely effective and reliable method to repair cracks in concrete. By using crack injection systems we accomplish several objectives at the same time for example repairing a foundation crack with crack injection prevents the possibility of future basement leak.

• Epoxy crack Injection
• Polyurethane crack Injection
• Turbo Seal Injection

Flooring, Coating and Painting

At Roof Care Abu Dhabi we are specialized in all types of Industrial coatings as well as protective coatings. An industrial coating is a coating defined by its protective, rather than its aesthetic properties, although it can provide both. Sure Seal expertise include Polyurethane, Epoxy, Traffic deck coating and Anti carbonation coating.

• Epoxy Coating
• Anti-Carbonation
• Polyurethane Coating
• Concrete Floor Self Leveling

Expansion Joint sealant

Roof Care Abu Dhabi has excelled in field of professional application of Joint Sealants. Expansion joint assembles of different types and sizes, Poly sulfide, Polyurethane sealant, epoxy joint filler for the concrete floors under heavy traffic movement, fuel resistant, hot poured joint sealant in runways and fire stations and Silicon sealant for watertight resistance. Smoke and fire barrier sealant within the rated walls.

• Poly sulfide sealant
• Polyurethane sealant
• Silicon sealant